SF110XP0
Thin Section Bearing
SF110XP0 Thin Section Bearing Dentification
S:Material AISI440C Stainless Steel_no seals or shields
F:Series standard cross section_open bearing
110:Inch Size ( bearing bore 11.000 inch )
X: Bearing Type_four point contact
P: Separator_standard one piece formed ring with snap over pockets
0: Precision_precision class 1 per ABEC 1F
Please download rough drawing of thin section bearing for reference,formal drawing will be submitted after contact with sales@jcb-bearing.com
Part number comparison
Same As Specification Of SF110XP0 Following Bearing Designation | |
SF110XP0 | SF110XP0*JCB |
SF110XP0 Thin Section Bearing Specifications
For Shaft Diameter | 11.000″ |
Inner Diameter (d) | 11.000″ |
Inner Diameter Tolerance | -0.0014″– 0″ |
For Housing ID | 12.500″ |
Outer Diameter (D) | 12.500″ |
Outer Diameter Tolerance | -0.0014″– 0″ |
Width (B) | 0.7500″ |
Width Tolerance | +.000 –.005″ |
Bearing type | Four Point contact ball |
Contact Angle | – |
Seal Type | Open |
Cross Section | 3/4″ x 3/4″ |
Internal clearance | – |
Operating temperature range | – |
Radial dynamic load capacity | request by email |
Radial static load capacity | – |
Axial dynamic load capacity | request by email |
Axial static load capacity | – |
Bearing material | AISI 440C |
Ring material | AISI 440C |
Separator material | – |
Separator type | – |
Maximum rpm | – |
Weight(lbs) | 4.800 |
Thin Section Bearing Descriptions
1、BEARING MATERIAL AISI440C:
Country | Standard | Steel Grade |
AMERICA | A276 | 440C |
GERMANY | DIN17400 | X105CRMO17 |
JAPAN | JIS G4303 | SUS440C |
CHINA | GB 1220 | 11Cr17/9Cr18 |
FRANCE | NFA35-578 | Z100CD17 |
RUSSIAN | GOST 5632 | 95X18 |
2、SERIES STANDARD CROSS SSCTION:0.750″ × 0.750″ :
3、BEARING INSIDE STRUCTURE :
A : Angular contact single bearing (not ground for universal duplexing)
B : Angular contact pair—duplexed back to back
C : Radial contact
F : Angular contact pair—duplexed face to face
T : Angular contact pair—duplexed tandem
U : Angular contact single bearing—ground for universal duplexing
X : Four-point contact
Z : Other
4、SEPARATOR OR CAGE :
C : Non-metallic composite, segmental, “snap-over” type – C, X
D : Phenolic laminate, one-piece ring, “snap-over” type – C, X
E : Brass, segmental “snap-over” type – C, X
L : Nylon one-piece molded ring with “snap-over” pockets – C, X
N : Nylon molded strip with “snap-over” pockets – C, X
P : Standard one-piece formed ring with “snap-over” pockets- C, X
T : Stainless steel, formed ring “snap-over” type – C, X
V : Brass, formed ring, “snap-over” pockets – C, X
X : PEEK, one-piece molded ring with “snap-over” pockets – C, X
G : Nylon one-piece molded ring with circular pockets – A
H : Phenolic laminate one-piece machined ring with circular pockets – A
J : Nylon molded strip with circular pockets – A
K : Phenolic laminate, riveted two-piece ring type – A, C, X
Q : PEEK, one-piece molded ring with circular pockets – A
R : Standard one-piece formed ring with circular pockets – A
U : Stainless steel, formed ring circular pockets type – A
Y : Brass, formed ring, circular pockets type – A
M : Formed wire strip or segmental cage, “snap-over” pockets – A, C, X
W : Formed wire strip or segmental cage, “snap-over” pockets – C, X
F : Full complement bearing – A, C, X
S : Helical coil spring – C, X
Z : Other (toroid ball spacers, spacer slugs, spacer ball or others available) – A, C, X
5、ACCURACY CLASS:
ABEC 1F , ABEC 3F , ABEC 5F , ABEC 7F
6、BEARING INSIDE CLEARANCE:
A | 0.0000″to 0.0005″Clearance | K | 0.0000″to 0.0005″Preload |
B | 0.0000″to 0.0010″Clearance | L | 0.0000″to 0.0010″Preload |
C | 0.0005″to 0.0010″Clearance | M | 0.0005″to 0.0010″Preload |
D | 0.0005″to 0.0015″Clearance | N | 0.0005″to 0.0015″Preload |
E | 0.0010″to 0.0020″Clearance | P | 0.0010″to 0.0020″Preload |
F | 0.0015″to 0.0025″Clearance | Q | 0.0010″to 0.0015″Preload |
G | 0.0020″to 0.0030″Clearance | R | 0.0015″to 0.0025″Preload |
H | 0.0030″to 0.0040″Clearance | S | 0.0020″to 0.0030″Preload |
I | 0.0040″to 0.0050″Clearance | Z | Other clearance or preload not specified above |
J | 0.0050″to 0.0060″Clearance |
Similar Products Of SF110XP0 Thin Section Bearing
Bearing No. | Bearing No. | Bearing No. | Bearing No. | Bearing No. | Bearing No. |
SF110XP0 | SF110XP1 | SF110XP2 | SF110XP3 | SF110XP4 | SF110XP6 |
Contact Information
Luoyang JCB Bearing Technology Company Limited
Company Address: No. 285, Fenghua Road, High-tech Development Zone, Luoyang Area, (Henan) Free Trade Zone of China.
Postal code : 471000
Phone : 0086-379-6861-1678 Fax : 0086-379-6861-1679
E-mail: sales@jcb-bearing.com
Reserved E-mail: jcb-bearing@hotmail.com
WhatsApp:+8618603795853
Website: www.jcb-bearing.com