SB042CP0 THIN SECTION BEARING

SB042CP0

Thin Section Bearing

SB042CP0 Thin Section Bearing Dentification

S:Material AISI440C Stainless Steel_no seals or shields

B:Series standard cross section_open bearing

042:Inch Size ( bearing bore 4.200 inch )

C: Bearing Type_radial contact

P: Separator_standard one piece formed ring with snap over pockets

0: Precision_precision class 1 per ABEC 1F

Please download rough drawing of thin section bearing  for reference,formal drawing will be submitted after contact with sales@jcb-bearing.com

SB042CP0 of thin section bearing.pdf

Part number comparison

Same As Specification Of SB042CP0 Following Bearing Designation 
SB042CP0SB042CP0*JCB

SB042CP0 Thin Section Bearing Specifications

For Shaft Diameter4.250″
Inner Diameter (d)4.250″
Inner Diameter Tolerance-0.0008″– 0″
For Housing ID4.875″
Outer Diameter (D)4.875″
Outer Diameter Tolerance-0.0008″– 0″
Width (B)0.3125″
Width Tolerance+.000 –.005″
Bearing typeRadial contact ball
Contact Angle
Seal TypeOpen
Cross Section5/16″ x 5/16″
Internal clearance
Operating temperature range
Radial dynamic load capacityrequest by email
Radial static load capacity
Axial dynamic load capacityrequest by email
Axial static load capacity
Bearing materialAISI 440C
Ring materialAISI 440C
Separator material
Separator type
Maximum rpm
Weight(lbs)0.310

Thin Section Bearing Descriptions

1、BEARING MATERIAL AISI440C:
CountryStandardSteel Grade
AMERICAA276440C
GERMANYDIN17400X105CRMO17
JAPANJIS G4303SUS440C
CHINAGB 122011Cr17/9Cr18
FRANCENFA35-578Z100CD17
RUSSIANGOST 563295X18
2、SERIES STANDARD CROSS SSCTION:0.3125″ × 0.3125″ :
SB042CP0 thin section bearing

SB042CP0 thin section bearing

3、BEARING INSIDE STRUCTURE :

A : Angular contact single bearing (not ground for universal duplexing)

B : Angular contact pair—duplexed back to back

C : Radial contact

F : Angular contact pair—duplexed face to face

T : Angular contact pair—duplexed tandem

U : Angular contact single bearing—ground for universal duplexing

X : Four-point contact

Z : Other

4、SEPARATOR OR CAGE :

C : Non-metallic composite, segmental, “snap-over” type – C, X

D : Phenolic laminate, one-piece ring, “snap-over” type – C, X

E : Brass, segmental “snap-over” type – C, X

L : Nylon one-piece molded ring with “snap-over” pockets – C, X

N : Nylon molded strip with “snap-over” pockets – C, X

P : Standard one-piece formed ring with “snap-over” pockets- C, X

T : Stainless steel, formed ring “snap-over” type – C, X

V : Brass, formed ring, “snap-over” pockets – C, X

X : PEEK, one-piece molded ring with “snap-over” pockets – C, X

G : Nylon one-piece molded ring with circular pockets – A

H : Phenolic laminate one-piece machined ring with circular pockets – A

J : Nylon molded strip with circular pockets – A

K : Phenolic laminate, riveted two-piece ring type – A, C, X

Q : PEEK, one-piece molded ring with circular pockets – A

R : Standard one-piece formed ring with circular pockets – A

U : Stainless steel, formed ring circular pockets type – A

Y : Brass, formed ring, circular pockets type – A

M : Formed wire strip or segmental cage, “snap-over” pockets – A, C, X

W : Formed wire strip or segmental cage, “snap-over” pockets – C, X

F : Full complement bearing – A, C, X

S : Helical coil spring – C, X

Z : Other (toroid ball spacers, spacer slugs, spacer ball or others available) – A, C, X

5、ACCURACY CLASS:

ABEC 1F , ABEC 3F , ABEC 5F , ABEC 7F

6、BEARING INSIDE CLEARANCE:
A0.0000″to 0.0005″ClearanceK0.0000″to 0.0005″Preload
B0.0000″to 0.0010″ClearanceL0.0000″to 0.0010″Preload
C0.0005″to 0.0010″ClearanceM0.0005″to 0.0010″Preload
D0.0005″to 0.0015″ClearanceN0.0005″to 0.0015″Preload
E0.0010″to 0.0020″ClearanceP0.0010″to 0.0020″Preload
F0.0015″to 0.0025″ClearanceQ0.0010″to 0.0015″Preload
G0.0020″to 0.0030″ClearanceR0.0015″to 0.0025″Preload
H0.0030″to 0.0040″ClearanceS0.0020″to 0.0030″Preload
I0.0040″to 0.0050″ClearanceZOther clearance or preload not specified above
J0.0050″to 0.0060″Clearance

Similar Products Of SB042CP0 Thin Section Bearing

Bearing No.Bearing No.Bearing No.Bearing No.Bearing No.Bearing No.
SB042CP0SB042CP1SB042CP2SB042CP3SB042CP4SB042CP6

Contact Information

Luoyang JCB Bearing Technology Company Limited

Company Address: No. 285, Fenghua Road, High-tech Development Zone, Luoyang Area, (Henan) Free Trade Zone of China.

Postal code : 471000

Phone : 0086-379-6861-1678 Fax : 0086-379-6861-1679

E-mail: sales@jcb-bearing.com

Reserved E-mail: jcb-bearing@hotmail.com

WhatsApp:+8618603795853

Website: www.jcb-bearing.com

Send Us Email

Certification

Official Website

JCB logo