Product
Drawing
SA070XP0
Dentification of thin section bearing SA070XP0
J：Material AISI 52100 Steel_two seals-nitrile rubber
025：Bore (mm)
08：Width (mm)
X: Bearing Type_four point contact
P: Separator_standard one piece formed ring with snap over pockets
0: Precision_kaydon precision class 1 per ABEC 1F
Please download rough drawing of thin section bearing SA070XP0 for reference，formal drawing of thin section bearingSA070XP0 Jwill be submitted after contact with sales@jcb-bearing.com or sales@thinsectionbearings.com
Specifications
| Inner Diameter (d) | 25 mm |
| Inner Diameter Tolerance | -0.01mm to 0 |
| For Housing ID | 41 mm |
| Outer Diameter (D) | 41 mm |
| Outer Diameter Tolerance | -0.01mm to 0 |
| Width (B) | 8 mm |
| Width Tolerance | +.000 –.127mm |
| Bearing type | Four Point contact ball |
| Contact Angle | |
| Seal Type | Sealed |
| Cross Section | 8 mm |
| Weight(lbs) | 0.06 |
| Internal clearance: | |
| Operating temperature range: | |
| Radial dynamic load capacity: | |
| Radial static load capacity: | |
| Axial dynamic load capacity: | |
| Axial static load capacity: | |
| Bearing material: | |
| Ring material: | |
| Separator material: | |
| Separator type: | Circular Pocket |
| Maximum rpm: | |
| Bearings designation: |
