SG040XP0 THIN SECTION BEARING
SG040XP0
Thin Section Bearing
SG040XP0 Thin Section Bearing Dentification
S: Thin Section Bearing
No Code: Material AISI52100_no seals or shields
G：Series standard cross section_open bearing
040：Inch Size ( bearing bore 4.000 inch )
X: Bearing Type_four point contact
P: Separator_standard one piece formed ring with snap over pockets
0: Precision_precision class 1 per ABEC 1F
Please download rough drawing of thin section bearing for reference，formal drawing will be submitted after contact with sales@jcb-bearing.com
Part number comparison
| Same As Specification Of SG040XP0 Following Bearing Designation | |||||
| KG040XP0 | KG040XP0*JCB | CSXG040 | NBX10215 | RG040XP0 | SG040XP0 |
SG040XP0 Thin Section Bearing Specifications
| Inner Diameter (d) | 4.000″ |
| Inner Diameter Tolerance | -0.0008″– 0″ |
| For Housing ID | 6.000″ |
| Outer Diameter (D) | 6.000″ |
| Outer Diameter Tolerance | -0.0006″– 0″ |
| Width (B) | 1″ |
| Width Tolerance | +.000 –.005″ |
| Bearing type | Four Point contact ball |
| Contact Angle | – |
| Seal Type | Open |
| Cross Section | 1″ x 1″ |
| Weight(lbs) | 3.600 |
| Internal clearance | C0 |
| Operating temperature range | -65 to +250 °F |
| Radial dynamic load capacity | 7979 lbf |
| Radial static load capacity | 8210 lbf |
| Axial dynamic load capacity | 15150 lbf |
| Axial static load capacity | 20520 lbf |
| Bearing material | AISI 52100 |
| Ring material | AISI 52100 |
| Separator material | Brass/Composite |
| Separator type | Circular Pocket |
| Maximum rpm | 2400 rpm |
| Bearings designation | Request by email |
SG040XP0 Thin Section Bearing Descriptions
1、MATERIAL AISI52100：
| Country | Standard | Steel Grade |
| AMERICA | AISI ASTM/A295 | 52100 |
| GERMANY | DIN 17030 | 100Cr6 |
| JAPAN | JIS G4805 | SUJ2 |
| ENGLAND | BS 970 | 535A99 |
| CHINA | GB/T 18254 | GCr15 |
| FRANCE | NF A35-565 | 100C6 |
| SWEDEN | SWEDEN | SKF3 |
| KOREA | KS D3525 | STB2 |
| RUSSIAN | TOCT 801 | IIIX15 |
2、SERIES STANDARD CROSS SECTION：1.000″ × 1.000″
SG040XP0 thin section bearing
3、BEARING INSIDE STRUCTURE ：
A : Angular Contact
B : Duplexed Back to Back
C : Radial Contact
F : Duplexed Face to Face
T : Duplexed Tandem
X : 4 Point Contact
4、SEPARATOR OR CAGE ：
D : Phenolic , one piece “Snapover” C & X
F : Full complement , no retainer , filling slot required for C & X style
G : Nylon , circular pocket A
H : Phenolic , one piece , circular pocket A
L : Nylon , one piece ,”Snapover” C & X
N : Nylon , segmented “Snapover” C & X
P : Brass ,”Snapover” C & X
R : Brass , one piece , ciecular pocket A
T : Stainless steel , one piece “Snapover” C & X
U : Stainless steel , one piece , circular pocket A
Z : Other
5、ACCURACY CLASS：
ABEC 1F , ABEC 3F , ABEC 5F
6、BEARING INSIDE CLEARANCE：
| A | 0.0000 to 0.0005 clearance | I | 0.0040 to 0.0050 clearance |
| B | 0.0000 to 0.0010 clearance | J | 0.0050 to 0.0060 clearance |
| C | 0.0005 to 0.0010 clearance | K | 0.0000 to 0.0005 preload |
| D | 0.0005 to 0.0015 clearance | L | 0.0000 to 0.0010 preload |
| E | 0.0010 to 0.0020 clearance | M | 0.0005 to 0.0010 preload |
| F | 0.0015 to 0.0025 clearance | N | 0.0005 to 0.0015 preload |
| G | 0.0020 to 0.0030 clearance | P | 0.0010 to 0.0020 preload |
| H | 0.0030 to 0.0040 clearance | Z | special |
Similar Products Of SG040XP0 Thin Section Bearing
| Bearing No. | Bearing No. | Bearing No. |
| SG040XP0 | SG040XP3 | SG040XP5 |
Send Us Email
Certification
Official Website
